4 Safety Tips to Follow While Using Industrial LPG

More and more organizations in the industrial sector are using LPG for their heating, as well as cooking needs. This is a high energy fuel, which is also extremely flammable. It is essential to maintain proper safety while using this type of gas. This is due to the fact that lack of knowledge about LPG safety can result in carbon monoxide poisoning, fires, gas leaks and even deadly explosions. If you are the owner of an industrial unit who is using Industrial LPG, these are the 4 main safety tips that you should keep in mind while using this fuel.

Go for a registered company

You should always make sure that LPG is being provided by a registered company. Whether the installation, delivery or maintenance, everything should be according to proper safety standards existing in place. While setting up any gas device which makes use of LPG, you should get in touch with a registered installer. A certified installer would provide you with a certificate of conformity when it finishes the installation with success. The certificate would verify that the gas device was set up as per SABS standards.

Consider the qualifications

Not every installer can be found to possess similar qualifications. This is why, it is better to ask for a SAQCC Gas ID card – something that is issued to every registered installer. You can request to see this card and check the unique license or registration number online to ensure that the installer is not a dubious one. The back of this card contains this number, and can help you to know whether or not the agency is a registered installer of Propane in India and qualified properly for the setup process.

Be calm during a gas leak

In case of a gas leak, you can smell the leakage and remain as calm as possible. You should also advise others to maintain their composure. Put off any smoking items or flames in the surroundings. Unless this is done, there can be fires and even explosions from a source of ignition. If you can do it safely, you should turn off the cylinder valve of your LPG appliance. These devices have standard valves and you should turn these in a clockwise fashion in order to shut them off. Once this is done, you should leave the place and get in touch with the fire department. Wait for the firemen to arrive in a safe place, away from the possible source of gas leak.

Install CO sensors

It is also important for you to set up carbon monoxide sensors in the industrial unit. All areas of the compound should be fitted with these sensors, so that any leakage can easily be sensed and you can be warned of the same. It is essentially a good idea to set these up near to kitchens and other places where LPG gas appliances are mainly used. Such types of machines notify an increase in the quantity of carbon monoxide in the surrounding air through sound alarms. In case of a leak, such affordable machines can be life-savers for you and your staffs.